The GE Fanuc 90-30 Series a very versatile PLC system. It utilizes racks, power supplies, cpu's, and communication cards to provide you all of your PLC needs. The most used CPU for 90-30 systems is the IC693CPU364 and IC693CPU374. These CPUs include Ethernet communication connections in addition to 240K memory modules. The IC693PWR321 and IC693PWR330 both have battery connections on them to help retain programming. The IC693ACC301 and IC693ACC302 batteries can last up to 6 months without power.

The GE Fanuc Field Control product is now discontinued. Field Control systems have been widely used in waste water industry becuases it can be easily distributed. The IC670GBI102, IC670GBI002 BIU Bus Interface units and IC670PBI001 Profibus interface provide communications with all most all other GE Fanuc PLC systems. PLCpart.com can provide you with 24 hour turnaround times on most Field Control parts.

GE Rx3i Pacsystem was introduced to replace the Series 90-30 PLC system. It uses the same I/O system as the GE Series 90-30 plus more high speed I/O modules. The backplane offers a 10-100 times increase in throughput for newer modules IC695 as well as the ladder annotation resides in the IC695CPU310 or IC695CPU320 CPUs.

GE Series Three PLC is mainly the IC630CPU301 processor. The Series Three has an integrated programmer on the front of the CPU.

GE Series Five 5 PLC. PLCpart has many Series 5 parts In Stock and can Ship Today!

IC610CPU101, IC610CPU104, IC610CPU105 and IC610CPU106

General Electric Series Six PLC memory card. Communication cards are the IC600CB516 IC600CB517 IC600BF948. Instruction modules are IC600CB515 IC600CB525, IC600CB526

GE Fanuc Sereis 90-70 was first manufactured in 1988. The system was designed as a complete PLC system. It used the IC697CPU782 processor until the IC697CPX782 CPU replaced it. The newer processors no longer needs memory modules such as the IC697MEM733,IC697MEM735,IC697MEM731, or the IC697MEM719. The new Ethernet controller (IC697CMM742) removes the need for the old IC697CMM741 communication module.

The GE Fanuc Genius I/O system was designed in 1986. Using the IC660CBB902 and IC660CBB903 blocks the Genius I/O system can be interfaced with the GE Series 6 PLC Systems. There are many GE Fanuc PLC systems that can interface with the Genius I/O such as the Series 90-30 (IC693BEM331), Series 90-70 (IC697BEM731), Series 5 (IC655BEM510), Rx3i (IC694BEM331) and Rx7i (IC697BEM731).

The GE Fanuc Rx7i PLC system was designed to replace the GE Series 90-70 PLC system. It uses most of the GE Fanuc Series 90-70 I/O but also offers a newer more advanced I/O. The backplane retained the VME standard design for 3rd party interfaces. It is a simple process to upgrade / retrofit your old PLC system with the new Rx7i system. PLCpart will provide you with a free Series 90-70 ladder logic program conversion with your purchase of a new GE Rx7i PacSystem.

GE Fanuc Versamax PLC is an inexpensive PLC solution that is comparable to the GE Ganuc Genius I/O blocks. Versamax systems have multiple CPUs to create a stand alone system. Versamax systems can also communicate with Genius I/O, Profibus, Devicnet, and Ethernet LANs systems.